+7 (8452) 21-52-25 +7-906-150-94-49

Press-forging equipment
 
Hydraulic sheet-stamping press P236B

Specifications:

Rated force exerted by the cross-piece, kN:
1st stage5000
2st stage10000
3st stage16000
Rated force of clamping cross-piece, kN:
1st stage5000
2st stage10000
Rated force of hydraulic cushion, kN5000
Motion of the cross-piece (drawing and clamping), mm1400
Maximum distance between the table and the drawing cross-piece, mm2500
Dimensions of the table, mm3550 x 3550
Speed of the cross-piece in double-action and single-action presses, mm/s:
idle run200
backstroke125
working stroke for double action24.4
working stroke for single action14.6
Rated pressure, MPa20
Total installed power of all electric motors, kW438.75
Dimensions of the press, mm:
length18750
width10560
height above the floor level8500

Manufaсturer http://www.tkpo.ryazan.ru

 

The press is used to carry out the operations of drawing, hot and cold forming workpieces such as bottoms, tanks, reservoirs, boilers are manufactured.
It is a double-action, vertical, four-arm, presses, with pull-out table and hydraulic cushion
Inquiry